Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION REMARK HOT IDLE. REMARK When inspecting, if the machine is at an angle, move it to a level place to carry out the check. 3 - 75 CHECK OIL LEVEL IN POWER TRAIN CASE, ADD 1. Remove dipstick (G ), and wipe the oil off with a cloth. 2. Fully insert dipstick (G) into filler pipe (F), the n remov 3. Check that the oil dipstick (G). arks If the oil level is bel The dipstick has tw ow the L mark, add oil thro o sides for checking the en the engine is stopp ugh oil f oil level ed and iller (F). :

COLD STOP for use wh the oil temperature is low; and HOT IDLE for use wh en the e ngin e is idling and the oil te stopped starting operations, che ck the oil level with the sid e marke d COLD STOP. It is also possib le to check the oil level ev en after starting operations when the po wer train oil temperature is high, but in this case, run the engine at idling and use the side marked 4. If the oil is above th e H line, remove drain co ver (1) a t the left side at the bottom su rface of the power train ca se, pull out d rain hose (2) from the ta ke-out port, loosen drain p lug (3), d rain the excess oil, then che ck the oil level again. p securely. 5.

If the oil level is corr ect, tighten the oil filter ca