. OPERATION TROUBLESHOOTING 3 - 141 CHASSIS ( ) : Always contact your Komatsu distributor when dealing with these items. In cases of problems or causes which are not listed below, contact your Komatsu distributor for repairs. Problem Main causes Remedy Oil pressure in torque converter fails to rise Check, repair ( Check, replace) Add oil to the specified level. For details, see CHECK BEFORE STARTING Clean.
For details, see EVERY 500 HOURS SERVICE Torque converter is overheats Clogged radiator Engine water temperature is high Clogged oil cooler Oil pressure too low Lack of flow of lubricant caused by wear of power train gear pump Clean radiator core See ENGINE related parts ( Clean or repalce) Go to "Oil pressure in torque converter fails to rise" ( Replace gear pump) Torque converter oil temperature gauge dose not work ( Replace oil temperature gauge) ( Check, repair) Lacks drawber pull (machine dose not pick up speed) See ENGINE related parts Go to " Oil pressure in torque converter fails to rise" Machine will not move off when joystick is placed at FORWARD Add oil to specified level.
For details, see CHECK BEFORE STARTING Go to oil pressure in torque converter fails to rise ( Check, repair) Set to FREE position Dose not steer even when steering is operated ( Adjust linkage. Check brake pressure) Set to FREE position ( Check, repair) ( Check, replace) Machine doesn't stop when brake pedal are depressed ( Adjust linkage) ( Check brake pressure) Track comes off Adjust track tension. For details, see WHEN REQUIRED Sprocket develops abnormal wear Adjust track tension. For details, see WHEN REQUIRED blade rises too slowly or dose not rise at all (or blade tilts too slowly) Add oil to specified level. For details, see EVERY 250 HOURS SERVICE Check Set to FREE position