Komatsu — EFFECTIVE USE OF MODE SELECTION SYSTEM

. ATTACHMENTS, OPTIONS SHOE SLIP CONTROL When using shoe slip control, the travel speed for bedrock setting modes [1] - [5] is set at approx. 70 - 90% of the full travel speed. 6 - 18 REVERSE SLO W MODE This reduces t he travel speed whe n traveling in rever se, reduces the frequency of operating the decel erator pedal, and i mproves the riding comfort f or the operator. R1, 2, 3 en traveling in R2 or R3, it is Speed rang (If this mode i es that can be used: s only necessary wh possible to ch please contact ange the setting of t your Komatsu distri Applicable steep hills Use this mode to reduce the travel s peed when travelin g in R1, R2, or R3.

When the rev erse slow mode is ON, the travel speed is set to f the full travel speed. approx. 80% o f the full travel speed Use this mode to reduce the travel s peed when travelin g in reverse after ripping an d dozing bedrock or when traveling in r everse after dozing on stee p slopes. The trav el speed differs in each mode according to w hether it is used in c hoe slip control. ombination with the economy mode or with s When traveling on bedrock, if it is f elt that the travel s peed when traveling in rev erse is too high, turn the reverse slow mode ON. erse.

This will reduc e the travel speed w hen traveling in rev When traveling down slopes, if it is felt that the travel s peed when traveling in rev erse is too high, turn the reverse slow mode ON. erse. This will reduc e the travel speed w hen traveling in rev