MACK MP8 US07 ENGINE DESIGN FEATURES [200 EA] 3 Figure 3 — MACK MP8 Engine — Conventional Chassis To accommodate the low cab forward design, the EGR system and the inlet manifold are configured differently than for the conventional chassis. The EGR mixer mounts at the front of the inlet manifold on the conventional chassis, but near the rear of the manifold on the low cab forward design. Page 16 DESCRIPTION AND OPERATION 1. EGR Valve 2. Aftertreatment Fuel Injector 3. Variable Geometry Turbocharger 4. Discharge Recirculation Valve 5. EGR Mixer 6. EGR Cooler Outlet Pipe 7. Thermostat Housing 8. Differential Pressure Sensors 9. Venturi 10. Coolant Conditioner 11. Full Flow Oil Filters 12.
Bypass Oil Filter 13. Starter 14. EGR Cooler 15. EGR Cooler Inlet Pipe