SEN00949-00 50 Disassembly and assembly 9. Set track roller assembly (1) to block [1]. 10. Fit the O-ring to the shaft and install collar (3). Using push puller [2], push in collar (3) and install lock (4). 11. Refilling with oil 1) Remove plug (16). Using tool L4 , add oil through the oil filler. 5 Track roller: 0.32 l (GO140) 2) Tighten plug (16). 3 Plug: 98 – 137.2 Nm {10 – 14 kgm} 18 D65EX, PX, WX-15E0