SEN00282-01 10 Structure, function and maintenance standard Reverse 1st speed q When the transmission is set to the reverse 1st speed, the R clutch and 1st clutch are engaged. The power transmitted from the torque converter to input shaft (1) is then trans- mitted to output shaft (21). q F carrier (10) and 2nd and 3rd carriers (11) are connected by a spline, and rotate as one unit. Accordingly, the rotation of F carrier (10) is transmitted through 2nd planetary pinion (13) to 2nd ring gear (15). q The R clutch is actuated by the oil pressure applied to the R clutch piston, and holds ring gear (7).
The 1st clutch is actuated by the oil pressure applied to the 1st clutch piston, and holds 1st clutch inner drum (18). q Since 2nd ring gear (15) and 1st carrier (16) are meshed with each other, the power trans- mitted to 2nd ring gear (15) is transmitted to 1st planetary pinion (17). q Since 1st ring gear (18) is held by the 1st clutch, the power transmitted to 1st planetary pinion (17) is transmitted through 1st sun gear (20) to output shaft (21). q The power from the torque converter is trans- mitted to R planetary pinion (6) via input shaft (1) and R sun gear (5). q Since ring gear (7) is meshed with carrier (8) and held by the R clutch, R planetary pinion (6) rotates R ring gear (9).
The rotation of R ring gear (9), the direction of which is opposite to that of input shaft (1), rotates F carrier (10). 30 D65EX, PX, WX-15E0