50 Disassembly and assembly SEN00951-00 q Blade lift cylinder 1) Install retainers (14) and (13) to piston. 2) Using tool U4 , expand piston ring (10). a Set the piston ring on tool U4 and turn the handle 8 – 10 times to expand the ring. 3) Remove piston ring (10) from tool U4 , and install to piston. 4) Using tool U5 , compress piston ring (10). 5) Install wear rings (12) and (11). 3. Piston assembly, cylinder head assembly 1) Set cylinder rod to tool U1 . 2) Assemble cylinder head assembly (4) to rod. 3) Fit slider (9) and install piston assembly (8), then using tool U3 , tighten nut (7). a The slider (9) is installed only to the blade lift cylinder. 2 Threads of rod:
Thread tightener (Loctite No. 262 or equivalent) 3 Nut (7): D65EX, PX, WX-15E0 15 W Cylinder acro idth Tightening torque ss flats Blade lift 50 cylinder 1.08 ± 0.11 kNm mm {110 ± 11 kgm} Blade tilt 80 cylinder 3.97 ± 0.40 kNm mm {405 ± 40.5 kgm}