50 Disassembly and assembly SEN00953-00 1) Break aluminum seal (11) of the outlet of adhesive cartridge (10) and install the nozzle. 4) Remove release tape of the both-sided adhesive tape (3a) on the glass side. 5) Apply adhesive (13) to the outside of both- sided adhesive tape (3) of the operator’s cab. 2) Cut the tip of the adhesive nozzle (12) so that dimensions (f) and (g) will be as fol- lows. q Dimension (f): 10 mm q Dimension (g): 15 mm 3) Set adhesive cartridge (10) to caulking gun [7]. a An electric caulking gun is more effi- cient. D65EX, PX, WX-15E0 13