50 Disassembly and assembly SEN00953-00 14. Disconnect wiring connector DCL (21) from the back of cover (16). 20. Remove bracket (26). 15. Disconnect wiring connectors PL1 (17), PL2 (18) and STA (19). Disconnect wiring connector BRK from the back of part A. 21. Loosen locknut (27). a Make a mark of the installed height. 22. Remove cable (28) of the parking brake lock lever from the bracket. [*2] Disconnect wiring connector NSW from part A. 16. Remove cover (22) from the left side of the chassis. 23. Disconnect fuel filter bracket assembly (29). 24. Disconnect terminal HT/B (30) from the heater relay. 4 Cover assembly: 55 kg 25. Disconnect clamp (31). 17.
Remove the clamp of wiring harness (23) and move the wiring harness. 18. Remove the clamp and disconnect terminal (24). 19. Disconnect ground wire (25). D65EX, PX, WX-15E0 19