SEN00954-00 50 Disassembly and assembly Removal and installation of steering and transmission controller assembly 1 3. Remove the 4 mounting bolts and pull out steering and transmission controller assembly (3) toward you. 4. Disconnect wiring connectors ST1 (4), ST2 (5), and ST3 (6) and remove steering and trans- mission controller assembly (3). [*1] a When disconnecting each connector, loosen screw (L6) at the center of the wiring har- ness. a Use 4-mm hexagon wrench. Removal k Disconnect the cable from the negative (–) terminal of the battery. 1. Remove operator’s seat assembly (1). 4 Operator’s seat assembly: 70 kg 2. Remove left side cover (2).
Installation q Carry out installation in the reverse order to removal. [*1] 3 Mounting screw: 2.82 Nm {0.288 kgm} 4 D65EX, PX, WX-15E0