Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — BEVEL GEAR SHAFT, HASS AND BRAKE

SEN00283-01 10 Structure, function and maintenance standard Brake operation When brake is “released“ When brake is “operated“ (when brake pedal “depressed“) q When the brake pedal is released, brake valve is at “neutral“ position, and the back pressure port of piston (1) is filled with oil. q When brake pedal is depressed, brake valve is switched and the oil of back pressure port of piston (1) is drained. q Rising of oil pressure makes piston (1) push down springs (2) and (3) and move towards left direction, and releases disc (4) and plate (5).

q By reducing the oil pressure of back pressure port, piston (1) moves to the right direction using tension of springs (2) and (3), and makes disc (4) and plate (5) crimped to brake drum (6). Brake drum (6) is connected and fixed to steering case. q Power transmitted from bevel gear shaft via HSS to brake hub (7) is transmitted from hub (8) to output shaft (9) and then to final drive. q Power towards brake hub (7) or output shaft (9) is controlled by compressing disc (4) and plate (5). q By adjusting the depression power of the brake pedal and controlling the oil pressure given to piston (1), brake pedal can adjust the braking power. 16 D65EX, PX, WX-15E0