10 Structure, function and maintenance standard SEN00283-01 When brake is “operated“ (when brake pedal “depressed“, parking brake lever “free“) q As the brake pedal is depressed, guide (5) and shaft (6) is pushed to the right. q As the brake pedal is depressed further, the operation as described above is repeated until brake valve (3) reaches to the stroke end, at which the brake is fully “operated”. q As shaft (6) is pushed, it compresses modulat- ing spring (7), and its reaction force moves brake valve (3) to the right. Then port (Br) and chamber (B) close while port (Br) and port (T2) open.
q The oil pressure behind port (Br) is determined by the tension of return spring (4) of which the load varies in accordance with the brake pedal travel. q The oil from the power train pump enters chamber (A) through port (P) and blocked by chamber (B). q When the brake pedal travel is short, the oil pressure behind port (Br) is high, meaning that the brake is “half way operated”, and when the travel is long, the oil pressure is low, meaning that the brake is “operated”. q A portion of the oil which had flown into the brake piston back pressure port is drained from port (Br) to port (T2). The other portion of oil flows through port (Br) and orifice (a) to chamber (D).
q When the oil behind port (Br) is drained to port (T2) and the oil pressure is reduced, the oil in chamber (D) pushes piston (8). Then the force pushing brake valve (3) to the right is reduced, and brake valve (3) moves to the left by the tension of return spring (4). q Port (Br) and port (T2) are closed by the move- ment of brake valve (3) to the left, and the oil pressure behind port (Br) is maintained not to be further reduced. D65EX, PX, WX-15E0 21