10 Structure, function and maintenance standard SEN00283-01 Unit: mm D65EX, PX, WX-15E0 27 No. Check item Criteria Remedy 1 Backlash between No.1 pinion and No.1 gear Standard clearance Clearance limit Replace 0.23 – 0.61 1.0 2 Backlash between pinion and planetary pinion 0.18 – 0.45 1.0 3 Backlash between planetary pinion and ring gear 0.23 – 0.67 1.0 4 Outer diameter of oil seal contact surface of No.1 pinion (large) Standard size Tolerance Repair limit 80 –0.074 –0.074 79.9 5 Outer diameter of oil seal contact surface of No.
1 pinion (small) 70 –0.074 –0.074 69.9 6 Interference between pinion shaft and carrier Standard size Tolerance Standard interfer- ence Interfer- ence limit Shaft Hole 56 +0.051 +0.032 +0.030 +0.030 0.002 – 0.051 0.002 7 Axial clearance of 1st pinion bearing 0 – 0.1 Adjust 8 Standard shim thickness for No.1 pinion bearing cage 1.5 9 Projection of ball from No.1 pinion cover Standard size Repair limit Replace 5.2 1.5 10 Amount of wear of sprocket tooth surface 317 299 Build-up welding or replace