Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — WORK EQUIPMENT CONTROL

10 Structure, function and maintenance standard SEN00285-01 1. Work equipment lock lever 2. Blade PPC valve 3. Blade control lever 4. Ripper control lever (If equipped: D65EX-15E0, D65WX-15E0) 5. Ripper PPC valve (If equipped: D65EX-15E0, D65WX-15E0) 6. PPC lock valve Outline q The work equipment control system is a PPC system in which blade control lever (3) oper- ates blade PPC valve (2) and ripper control lever (4) operates PPC valve (5), moving each spool of the control valves.

q If work equipment lock lever (1) is set in the “lock“ position, it is connected to PPC lock valve (6) and the operator can move blade control lever (3) and ripper control lever (4) but cannot operate the work equipment. q If blade control lever (3) is set in the “float“ position, the hydraulic detent of blade PPC valve (2) works so that blade control lever (3) will hold itself. If work equipment lock lever (1) is set in the “lock“ position, the hydraulic detent is reset and blade control lever (3) returns to the “hold“ position automatically.

q While the engine is stopped, the hydraulic detent does not work even when the blade control lever (3) is in the “float“ position, and blade control lever (3) returns to “hold“ position automatically. D65EX, PX, WX-15E0 5