10 Structure, function and maintenance standard SEN00286-01 Operation q When spool (1) of the work equipment valve is at the “hold” position, the pump pressure (unload pressure) is sent to chambers (D) and (D'). q The pressure is not formed in chambers (H) and (H'), so pressure compensation valve spool (3) and steering priority valve spool (4) are pushed completely to the right. q The pump pressure passes through chambers (A) and (B) of steering priority valve (4), and is sent to chamber (C) of the work equipment valve. From here it goes through chambers (D) and (E) to chamber (F). q In the same way as topic “1.
Steering valve”, the position of pressure compensation valve spool (3) is determined to match the opening of work equipment valve spool (1), and the oil flow is determined so that the pressure loss of the control valve becomes equal to the control differential pressure ( d LS) of pump LS valve (7). D65EX, PX, WX-15E0 19