Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — ENGINE CONTROL SYSTEM

10 Structure, function and maintenance standard SEN00290-01 Engine speed control mechanism Engine stop mechanism q The engine controller receives the No.1 throttle signal (fuel control dial signal) and No.2 throttle signal (decelerator pedal signal). It also receives the No.3 throttle signal (controller control signal) from the transmission and steer- ing controller, and then selects the lowest com- mand signal and controls the fuel supply pump and injector. The 3rd throttle signal has 1) Automatic deceleration (F3, R3) q If the starting switch is set in the OFF position, the starting switch ACC signal to the engine controller is turned OFF.

q The engine controller stops supplying fuel to the engine to stop the engine. q The transmission and steering controller calcu- lates proper engine speed from the information of 1) and sends it as the No.3 throttle signal to the engine controller. q The information from the engine controller is owned jointly by the other controllers and transmitted so that the relationship between the engine and chassis will be optimized. q The automatic deceleration is a function of lowering the engine speed temporarily when the travel direction is changed from F3 or R3. (for protection of the transmission clutch) D65EX, PX, WX-15E0 11