SEN00290-01 10 Structure, function and maintenance standard KOMTRAX terminal 1. Communication antenna connector 2. GPS antenna connector 3. Machine harness connector (DEUTSCH-40P) Input and output signals DEUTSCH-40P [CN-G01] Outline q The KOMTRAX controller can send informa- tion via wireless communication antenna, acquiring various information of the machine from the network signal in the machine and the input signal. Also, the controller incorporates CPU (Central Processing Unit) and provide the wireless communication function and the GPS function.
q There are the LED lamp and the 7-segment indicator lamp in the display area, and these lamps are used for the testing and the trouble- shooting. q The information of the LED lamp and the 7- segment indicator lamp can be checked on the monitor panel by EMMS. 26 D65EX, PX, WX-15E0 Pin No. Signal name Input/Output signal 1 NC — 2 NC — 3 NC — 4 NC — 5 NC — 6 CAN shield GND — 7 CAN signal (L) Input/Output 8 CAN signal (H) Input/Output 9 NC — 10 NC — 11 NC — 12 NC — 13 NC — 14 NC — 15 NC — 16 NC — 17 NC — 18 NC — 19 NC — 20 Immobilizing signal Output Pin No.
Signal name Input/Output signal 21 Operation mode selection 1 Input 22 Operation mode selection 2 Input 23 NC — 24 NC — 25 NC — 26 NC — 27 Starting switch (C) Input 28 Alternator (R) Input 29 NC — 30 NC — 31 NC — 32 NC — 33 NC — 34 NC — 35 NC — 36 Starting switch (ACC) Input 37 Power source GND — 38 Power source GND — 39 Constant power source (24V) Input 40 Constant power source (24V) Input