Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — HANDLING OF REDUCED CYLINDER MODE OPERATION

SEN00585-00 30 Testing and adjusting Handling of reduced cylinder mode operation 1 a Reduced cylinder mode operation means to run the engine with the fuel injectors of 1 or more cylinders disabled electrically to reduce the number of effective cylinders. The pur- poses and effects of this operation are as fol- lows. 1. This operation is used to find out a cylinder which does not output power normally (or, combustion in it is abnormal). When a cylinder is selected for the reduced cylinder mode operation, if the engine speed and output do not change from the normal operation (all-cylinder operation), that cylinder has 1 or more defects. The possible defects are as follows.

q Leakage through cylinder head gasket q Defective injection q Defective piston, piston ring, and cylinder liner q Defective valve mechanism (Moving valve system) q Defect in electrical system 2. Since the common rail fuel injection system controls the injector of each cylinder electroni- cally, the operator can perform the reduced cyl- inder mode operation easily with switches to find out a defective cylinder. a The reduced cylinder mode operation is carried out by using the special functions of monitor panel. a For the operation method, see Testing and adjusting, “Special functions of monitor panel”. 30 D65EX, PX, WX-15E0