30 Testing and adjusting SEN00586-00 8. Adjustment mode (8-SERVICE ADJUST MODE) In this mode, you can adjust the control system and various devices of the machine. 2) Selecting adjustment items 1] On the adjustment code input screen, input the 4-digit code of the item to be adjusted by operating information switch (5), shift up switch (6) and shift down switch (7). 1) Selecting and implementing a mode 1] Select “Adjustment mode” on the mode selection screen. 2] If the mode is selected, code (Cb) is displayed on gear speed display sec- tion (1) and the title is displayed on multi-information section (2). 3] Display the adjustment code input screen by operating buzzer cancel switch (4). q [>]:
Moves cursor rightward. q [ q [UP]: Increases number. q [DOWN]: Decreases number. 2] After inputting the code, operate buzzer cancel switch (4) to display the monitoring screen. q [ U ]: Enters input mode. q [ U ]: Executes mode. a If an incorrect code is input, the adjustment code input screen appears again after showing the below screen. In this case, execute the above operation again. D65EX, PX, WX-15E0 23