30 Testing and adjusting SEN00586-00 a If the input codes are not correct, the code input screen appears again after the screen shown below. 4) In case of operating the machine in moni- toring mode, if the parking brake lever is set in the “free” position, gear speed dis- play section (1) returns to the normal dis- play and the machine can be operated normally. a At this time, even if the shift up or shift down switch is pressed with the PCCS lever in the neutral position, the shift cannot be changed.
(The displayed number is the code of monitoring mode.) To change the shift, shift the PCCS lever to the “forward” or “reverse” position and press the shift up or shift down switch while the machine is traveling. a To select another screen, return the parking brake lever to the “free” posi- tion temporarily and perform the nec- essary operation. 3) Displayed information on monitoring screen (Below figure shows examples) 1: Code 1 2: Information 1 3: Code 2 4: Information 2 a For the details, see the “Monitoring mode table”. D65EX, PX, WX-15E0 43