SEN00589-00 40 Troubleshooting Failure code [B@HANS] Hydraulic oil: Overheat 1 36 D65EX, PX, WX-15E0 Action code Failure code Failure symptom Hydraulic oil: Overheat (Mechanical system) — B@HANS Failure content • While engine is running, hydraulic oil temperature caution lamp flashes. Controller's action • Flashes warning lamp and turns on alarm buzzer. (Function of monitor panel) Symptoms that appears on machine • If the machine is operated in the same condition, the devices for hydraulic circuit of the work equip- ment may be damaged. General information • Duplication of failure code: Start the engine.
Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting 1 Hydraulic oil overheat (When system is normal) It is suspected that the problem causing a detection of hydraulic oil overheat is currently occurring or occurred in the past. Investigate the cause and damage condition, and correct it. 2 Defective hydraulic oil tem- perature caution lamp system Carry out troubleshooting of hydraulic oil temperature caution lamp circuit in accordance with “While engine is running, emergency warning item flashes” in E-mode.