40 Troubleshooting SEN00592-00 Failure code [DXA0KY] HSS pump TVC solenoid: Short circuit to power source line 1 Circuit diagram of HSS pump TVC solenoid D65EX, PX, WX-15E0 25 Action code Failure code Symptom of failure HSS pump TVC solenoid: Short circuit to power source line (Steering and transmission controller system) E01 DXA0KY Failure conte nt • Current flows constantly to HSS and work equipment pump TVC solenoid circuit. Controller's action • Stops outputting power to HSS and work equipment TVC solenoid circuit. Symptoms th appears on machin at • Large turning radius • Work equipment speed is slow.
e General information • Output state (current) to HSS and work equipment pump TVC solenoid left can be checked in moni- toring mode. (Code 01300, 01301: Output current of TVC solenoid) • Duplication of failure code: turn ON the starting switch.
Possible causes and t standard valu when norm Cause Defective HSS and work equipment pump TVC sole- 1 noid (internal disconnection) he Hot short of wiring harness 2 es (a contact with 24 V circuit) al Defective steering and 3 transmission controller Standard value when normal and remarks for troubleshooting Defective HSS and work quipment pump TVC sole- oid internal disconnection) aPrepare with starting switch OFF and diagnose with starting switch still OFF. HSP (male) Resistance Between (1) – (2) 9 – 19 z Resistance 9 – 19 z Hot short of wiring harness a contact with 24 V circuit) aPrepare with starting switch OFF and diagnose with starting switch ON.
Between ground and wiring harness Voltage Max. 1 V between ST3 (female) (7) – HSP (female) (1) Voltage Ma x. 1 V Defective steering and ransmission controller aPrepare with starting switch OFF and start the engine to diag- nose. ST3 Engine speed Voltage Low idle 9 – 19 Between (7) – (3) High idle Max. 1 V Engine speed Voltage Low idle 9 – 19 High idle Max. 1 V