40 Troubleshooting SEN00592-00 Failure code [DXH7KY] reverse clutch ECMV: Short circuit to power source line 1 Circuit diagram related to transmission reverse clutch ECMV D65EX, PX, WX-15E0 37 Action code Failure code Symptom of failure Reverse clutch ECMV: Short circuit to power source line (Steering and transmission controller system) CALL E 03 DXH7KY Failure co ntent • Current flows constantly to transmission reverse clutch solenoid circuit. Controll action • Flashes warning lamp and turns on alarm buzzer. er's • Stops outputting to transmission reverse clutch solenoid circuit. • Limits operation of engine and transmission.
Symptom appea on mach s that • Once machine is stopped, engine speed is limited to medium (half). rs • Once machine is stopped, travel is limited to R1. ine Gener informat • Output state (current) to reverse clutch solenoid can be checked in monitoring mode. al (Code 31606, 31616: Output current of reverse clutch ECMV) ion • Duplication of failure code:
Engine start + reverse travel Possib causes an standard v when nor Cause Defective reverse clutch ECMV 1 (Internal disconnection and short circuit) le d the Hot short of wiring harness 2 alues (a contact with 24 V circuit) mal Defective steering and 3 transmission controller Standard value when normal and remarks for troubleshooting Defective reverse clutch ECMV (Internal disconnection and short circuit) aPrepare with starting switch OFF and diagnose with starting switch still OFF. RSOL (male) Resistance Between (1) – (2) 5 – 25 z Hot short of wiring harness (a contact with 24 V circuit) aPrepare with starting switch OFF and diagnose with starting switch ON.
Between ground and wiring harness betwee ST3 (female) (37) – RSOL (female) (1) n Voltage M ax. 1 V Defective steering and transmission controller aPrepare with starting switch OFF and diagnose with starting switch ON. ST3 PCCS lever Voltage Between (37) – (13) R 5 – 25 V N Max. 1 V