SEN00593-00 40 Troubleshooting E-17 The buzzer cancel switch does not work. 1 36 D65EX, PX, WX-15E0 Symptom of failure • The buzzer cancel switch does not work. General information Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting 1 Defective buzzer cancel switch (Internal disconnec- tion or short circuit) aPrepare with starting switch OFF and diagnose with starting switch still OFF. BUZ (male) Buzzer cancel switch Resistance Between (1) – (2) OFF(0) Min. 1 Mz t Max. 1 z Between (1) – (3) OFF(0) Min. 1 Mz U Max.
1 z 2 Disconnection in wiring harness (Disconnection or defective contact of connectors) aPrepare with starting switch OFF and diagnose with starting switch still OFF. Wiring harness between ST2 (female) (36) – BUZ (female) (2) Resis- tance Max. 1 z Wiring harness between ST2 (female) (26) – BUZ (female) (3) Resis- tance Max. 1 z Wiring harness between BUZ (female) (1) – GND04 Resis- tance Max. 1 z 3 Defective harness grounding (Contact with ground circuit) aPrepare with starting switch OFF and diagnose with starting switch still OFF. Between ground and wiring harness between ST2 (female) (36) – BUZ (female) (2) Resis- tance Min.
1 Mz Between ground and wiring harness between ST2 (female) (26) – BUZ (female) (3) Resis- tance Min. 1 Mz 4 Defective steering and trans- mission controller aPrepare with starting switch OFF and diagnose with starting switch ON. Steering and trans- mission controller Buzzer cancel switch Voltage Between ST2 (36) – ST3 (21), (31), (32) and (33) OFF(0) 5 – 11 V t Max. 1 V Between ST2 (26) – ST3 (21), (31), (32) and (33) OFF(0) 5 – 11 V U Max. 1 V