SEN00593-00 40 Troubleshooting E-18 The information switch does not work. 1 38 D65EX, PX, WX-15E0 Symptom of failure • The information switch does not work. General information Possible causes and the standard values when normal Cause Standard value when normal and remarks for troubleshooting 1 Defective information switch (Internal disconnection and short circuit) aPrepare with starting switch OFF and diagnose with starting switch still OFF. CUR (male) Information switch Resistance Between (1) – (2) OFF(0) Min. 1 Mz > Max. 1 z Between (1) – (3) OFF(0) Min. 1 Mz Max.
1 z 2 Disconnection in wiring harness (Disconnection or defective contact of connectors) aPrepare with starting switch OFF and diagnose with starting switch still OFF. Wiring harness between ST2 (female) (16) – CUR (female) (2) Resis- tance Max. 1 z Wiring harness between ST2 (female) (6) – CUR (female) (3) Resis- tance Max. 1 z Wiring harness between CUR (female) (1) – GND04 Resis- tance Max. 1 z 3 Defective harness grounding (Contact with ground circuit) aPrepare with starting switch OFF and diagnose with starting switch still OFF. Between ground and wiring harness between ST2 (female) (16) – CUR (female) (2) Resis- tance Min.
1 Mz Between ground and wiring harness between ST2 (female) (6) – CUR (female) (3) Resis- tance Min. 1 Mz 4 Defective steering and trans- mission controller aPrepare with starting switch OFF and diagnose with starting switch ON. Steering and trans- mission controller Information switch Voltage Between ST2 (16) and ST3 (21), (31), (32), (33) OFF(0) 5 – 11 V > Max. 1 V Between ST2 (6) and ST3 (21), (31), (32), (33) OFF(0) 5 – 11 V Max. 1 V