Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — POWER TRAIN

SEN00282-01 10 Structure, function and maintenance standard Power train, Part 1 1 Power train 1 Outline q The power generated by engine (1) has its tor- sional vibration dampened by damper (2), and then passes through universal joint (3) and is transmitted to torque converter (7). generating a difference in speed on the right and left. It is also possible to use the HSS mechanism to rotate the right and left sides in opposite directions to carry out counter-rotation. q The power from the engine is transmitted through the oil by torque converter (7) to the transmission input shaft in accordance with the change in load. q Brake (12) built in HSS unit (10) is used for braking the machine.

Brake (12) is a wet, multi- ple disc clutch and spring boosted type. The power sent from brake (12) is transmitted to final drive (13). q Transmission (8) uses a combination of a plan- etary gear system and hydraulic clutches to reduce the speed and shift the gears (3 for- ward speeds and 3 reverse speeds). It con- nects 2 sets of clutches selected according to the change in load and transmits the power to bevel gear (9) from the bevel pinion at the rear end of the transmission. q Final drive (13) consists of a single-stage spur gear and a single-stage planetary gear system. It reduces the speed and rotates sprocket (14) to drive track shoe (15) and move the machine.

q Cooling fan motor (19) is rotated with the oil discharged from cooling fan pump (6) driven by PTO (5). q The power transmitted to HSS unit (10) is transmitted through the bevel gear shaft to the HSS. HSS pump (4) is driven by PTO (5), and dis- charged oil of the HSS pump drives HSS motor (11). The rotation of the pair of the HSS gears on the right and left is controlled by HSS motor (11). The steering direction is controlled by 2 D65EX, PX, WX-15E0