10 Structure, function and maintenance standard SEN00282-01 1 1. Steering/directional/gear shift lever (PCCS lever) 2. Transmission and steering controller 3. Engine controller 4. Control valve 5. EPC valve 6. HSS pump 7. Servo valve 8. HSS motor 9. HSS circuit 10. Engine 11. Final drive 12. Sprocket 13. Hydraulic tank q The HSS system consists of control valve (4), HSS pump (6) and HSS motor (8). It turns the machine continuously without lowering the traveling speed by making a difference in speed between both track shoes.
Outline q Transmission and steering controller (2) con- trols EPC valve (5) of control valve (4) to con- trol the rotating direction and the rotating speed of HSS motor (8) according to the tilting direction and angle of directional/steering/gear shift lever (1). HSS motor (8) acts on the planetary gear mechanism of the bevel gear shaft making a difference in speed between both sprockets (12) to turn the machine. Input and output signals a. Forward and reverse signals b. Steering signal c. Engine control information d. Work equipment oil pressure signal e.
CAN communication network q Transmission and steering controller (2) senses the engine speed and the oil pressure at each part, and controls HSS pump (6) and control valve (4) so that engine (10) will not stall. q The engine speed signal and other engine control information items are sent and received through the CAN communication network which connects engine controller (3) and trans- mission and steering controller (2). D65EX, PX, WX-15E0 5