Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — METHOD OF USING TROUBLESHOOTING CHARTS

40 Troubleshooting SEN00595-00 Troubleshooting of engine (S-mode) 1 Method of using troubleshooting charts 1 The troubleshooting chart consists of the “ques- tions”, “check items”, “causes”, and “troubleshoot- ing” blocks. The questions and check items are used to pinpoint high probability causes by simple inspection or from phenomena without using troubleshooting tools. Next, troubleshooting tools or direct inspection are applied to check the narrowed causes in order from the most probable one to make final confirmation according to the troubleshooting procedure. [Questions]: Items to be drawn from the user or operator. They correspond to A and B in the chart on the right.

The items in A are basic ones. The items in B can be drawn from the user or operator, depending on their level. [Check items]: Items to be simply checked by the serviceman to narrow down causes. They correspond to C in the chart on the right. [Causes]: Items to be narrowed from the questions and check items. The serviceman narrows down the probable causes from A, B, and C. [Troubleshooting]: Items to finally verify whether the narrowed down causes are undoubtedly the real causes using the troubleshooting tools and direct inspections. Items listed in the [Questions] and [Check items] and related to the [Causes] are marked with E , Q , or w . E :

Causes to be referred to for questions and check items Q : Causes related to questions and check items w : Causes highly probable among ones marked with Q a When narrowing the “causes”, apply the items marked with w before those marked with Q . When narrowing the causes, do not apply the items marked with E . (If no items have other marks and the causes cannot be narrowed, however, you may apply them.) D65EX, PX, WX-15E0 3