Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — S-12 OIL PRESSURE DROPS

40 Troubleshooting SEN00595-00 S-12 Oil pressure drops 1 D65EX, PX, WX-15E0 19 General causes why oil pressure drops • Leakage, clogging, wear of lubricating system • Defective oil pressure control • Improper oil used (improper viscosity) • Deterioration of oil due to overheating Cause Worn bearing journal Lack oil in oil pan Water, fuel in oil Clogged strainer inside oil pan Clogged, broken pipe inside oil pan Defective oil pump Defective regulator valve Clogged oil filter Leaking, crushed, clogged hydraulic piping Defective oil level sensor, defective wiring harness Check items Questions Confirm recent repair history Degree of use of machine Operated for long period E E E Oil level monitor indicates drop in oil pressure (when monitor is installed) Q w Non-specified oil is being used Q Q Replacement of filters has not been carried out according to Operation & Maintenance Manual w Oil pressure moni- tor (when monitor is installed) indicates oil pressure drop at low idle w indicates oil pressure drop at low idle and high idle Q w w w Q indicates oil pressure drop on slopes w sometimes indicates oil pressure drop w Q Oil level monitor indicates low amount of oil (when monitor is installed) w w Oil level in oil pan is low w There is crushing, external leakage from hydraulic piping w Oil is cloudy white and smells of diesel oil w Metal particles are found when oil in oil pan is drained w Metal particles are found when oil inside oil filter is drained w Q Troubleshooting Metal particles are found in oil filter q See S-13 Check oil pan strainer and pipe directly q q Oil pump rotation is heavy, there is play q Deterioration, damage of valve, spring in regulator valve q Check oil filter directly q When oil level sensor is replaced, oil level monitor displays normally q Action Replace Add — Clean Correct Replace Adjust Replace Correct Replace