Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — HOW TO READ THIS MANUAL

50 Disassembly and assembly SEN00944-00 2. Disassembly and assembly of assemblies Special tools Disassembly q In Disassembly section, the work procedures, precautions and know-how for carrying out those procedures, and quantity of the oil and coolant drained are described. q Special tools which are deemed neces- sary for removal or installation of parts are described as A1 X1 etc. and their part names, part numbers and quantities are described in the special tool list. q The meanings of the symbols used in Disas- sembly section are as follows. k : This mark indicates safety-related precau- tions that must be followed when imple- menting the work. a :

Know-how or precautions for work q Also the following information is described in the special tool list. 1) Necessity t : Special tools that cannot be substi- tuted and should always be used (installed). q : Special tools that will be useful if avail- able and are substitutable with com- mercially available tools. 2) Distinction of new and existing special tools N : Tools newly developed for this model. They respectively have a new part number. R : Tools with upgraded part numbers. They are remodeled from already available tools for other models. Blank: Tools already available for other models. They can be used without any modification. 3) Circle mark Q in sketch column: 6 :

Quantity of oil or coolant drained Assembly q In Assembly section, the work procedures, pre- cautions and know-how for carrying out those procedures, and quantity of the oil and coolant added are described. q The meanings of the symbols used in Assem- bly section are as follows. k : Precautions related to safety in execution of work a : This mark gives guidance or precautions when doing the procedure. 2 : Type of coating material 3 : Tightening torque q The sketch of the special tool is pre- sented in the section of "Sketches of special tools". 5 : Quantity of oil or coolant to be added q Part No. of special tools starting with 79 T- - :

means that they can not be supplied from Komatsu in Japan (i.e. locally made parts). q Various special tools are illustrated for the con- venience of local manufacture. * *** **** Sketches of special tools a General tools that are necessary for removal or installation are described as [1], [2]•••etc. and their part names, part numbers and quantities are not described. D65EX, PX, WX-15E0 3