Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — SPECIAL TOOL LIST

50 Disassembly and assembly SEN00944-00 Special tool list 1 a Tools with part number 79 Q T- QQQ - QQQQ cannot be supplied (they are items to be locally manufac- tured). a Necessity: t : Cannot be substituted, should always be installed (used). q : Extremely useful if available, can be substituted with commercially available part. a New/remodel: N: Tools with new part numbers, newly developed for this model. R: Tools with upgraded part numbers, remodeled from items already available for other models. Blank: Tools already available for other models, used without any modification. a Tools marked Q in the Sketch column are tools introduced in special sketches (See Sketches of special tools).

D65EX, PX, WX-15E0 7 Item Symbol Part No.

Part name Necessity Q'ty New/remodel Sketch Nature of work, remarks Removal and installation of fuel supply pump, fuel injector and cylin- der head assembly A1 795-799-1131 Gear t 1 Cranking Removal and instal- lation of fuel supply pump assembly A2 795-799-1390 Remover t 1 Removal, installation of fuel supply pump drive gear Removal and installation of fuel injector A 3 795-799-6700 Puller t 1 Removal of fuel injector assembly 4 795-799-8150 Remover q 1 Removal and installation of engine rear seal A 5 795-931-1100 Seal puller q 1 Removal of engine rear seal 7 795-799-1150 Repair stand q 1 Fitting of engine rear seal 795-799-2280 Adapter q 1 Removal and installation of engine front seal A6 795-799-8120 Oil seal driver q 1 N Installation of engine front seal Removal and installation of cylin- der head assembly A8 790-331-1120 Wrench (angle) q 1 Tightening of cylinder head bolt Disassembly and assembly of TORQ- FLOW transmission assembly D1 799-301-1600 Oil leak tester t 1 Check of operation of piston Disassembly and assembly of HSS assembly E 1 791T-422-1320 Hanger q 1 Q Removal, installation of brake and carrier assembly 2 790-302-1500 Wrench kit q 1 Removal, installation of bevel pinion nut 3 796-730-2300 Wrench assembly q 1 Adjustment of preload on bevel gear shaft and bevel gear assembly 4 Commercially available or 795-630-1810 Torque wrench q 1