SEN00947-00 50 Disassembly and assembly Power train, Part 1 1 Removal and installation of power train unit assembly 1 6. Disconnect hoses (6), (7), and (8). 7. Remove suction tube (9). Removal k Disconnect the cable from the negative (–) terminal of the battery. 1. Drain oil. 6 Hydraulic tank: 55 l 6 Power train case: 48 l 2. Remove the floor frame assembly. For details, see "Removal and installation of floor frame assembly." 3. Remove the fuel tank assembly. For details, see "Removal and installation of fuel tank assembly." 4. Disconnect hoses (1) and (2) and remove clamp (3). 8. Disconnect hoses (10) and (11) on the control valve side. 9. Remove oil level gauge guide (12). 5.
Disconnect hoses (4) and (5). 10. Disconnect hoses (13) and (14) from the HSS motor. 2 D65EX, PX, WX-15E0