50 Disassembly and assembly SEN00948-00 3) Set puller [4] and loosen 4 hexagon socket head bolts and remove cover (41). a The inner race side of the bearing comes out. a Do not remove bolts (40) until cover (41) comes off. 7) Push up and remove cage (51), taking care not to damage the disc. 8) Remove seal rings (53) and (27) from cage (51). 9) Using eyebolts [7], remove drum (45), discs, and plates as a unit. 4) Remove bearing (60) from cover (41). 10) Remove discs (46), plates (47), and springs (48) from drum (45). 5) Remove spring (42). 6) Using eyebolts [5], remove piston (43). 11) Remove snap ring (59) and bearing (57). a Pry up the bearing from the cut of the hub. D65EX, PX, WX-15E0 5