Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — DISASSEMBLY AND ASSEMBLY OF HSS ASSEMBLY

50 Disassembly and assembly SEN00948-00 2) Using gear puller [8], remove sun gear (72) and bearing (98). 3) Disassembly of bevel pinion assembly i) Remove bolt (97), plate (99), and pin (100). 3) Using the bearing race puller, remove bearing (74). 4) Remove collar (71). 5) Remove snap ring (93). a Only the right side of the machine. ii) Secure the pinion with a press and remove nut (101) with tool E2 . iii) Using push tools [11], remove bevel pinion (102) from cage (103). 9. Bevel pinion assembly 1) Remove the mounting bolts. 2) Using guide bolts [9] and forcing screws [10], remove bevel pinion assembly (95) and shim (96). a Check the quantity and thickness of the shims and store them.

iv) Remove bearing (104). v) Remove outer races (105) and (107) from cage (103). D65EX, PX, WX-15E0 7