FCA 2022 Chassis Cab — LATCH Positions For Installing Child Restraints In This Vehicle

SAFETY 293 6 Frequently Asked Questions About Installing Child Restraints With LATCH Can a child seat be installed in the center position using the inner LATCH lower anchorages from the outboard seating positions? N/A – Regular / Crew Split Rear Bench No – Crew Full Rear Bench Regular Cab Front/Full Bench Rear Seat: Use the seat belt and tether anchor to install a child seat in the center seating position. Split Bench Rear Seat: Use the supplied center lower anchorages to install a child restraint in the center position. Can two child restraints be attached using a common lower LATCH anchorage? No Never “share” a LATCH anchorage with two or more child restraints.

If the center position does not have dedicated LATCH lower anchorages, use the seat belt to install a child seat in the center position next to a child seat using the LATCH anchorages in an outboard position. Can the rear-facing child restraint touch the back of the front passenger seat? Yes The child seat may touch the back of the front passenger seat if the child restraint manufacturer also allows contact. See your child restraint owner’s manual for more information. Can the rear head restraints be removed? Yes The head restraints can be removed in every rear seating position if they interfere with the installation of the child restraint Ú­page­34.