30 GETTING TO KNOW YOUR VEHICLE NOTE: 1. Place the vehicle’s ignition in the ON/RUN position (do not start the engine). 3. Once the profile has been recalled, push and release the set (S) button on the memory switch. If equipped with power convex mirrors, these mirror positions will not set as part of a memory profile. 2. Adjust all memory profile settings to desired preferences (i.e., driver’s seat, outside mirrors, adjustable pedals (if equipped), and radio station presets). 4. Push and release button (1) or (2) accordingly. “Memory Profile Set” (1 or 2) will display in the instrument cluster. Your vehicle is equipped with two key fobs, each can be linked to either memory position 1 or 2.
The driver memory settings switch is located on the driver door, next to the door handle, and consists of three buttons: 3. Push the set (S) button on the memory switch, and then push the desired memory button (1 or 2) within five seconds. The instrument cluster display will display which memory position has been set. 5. Push and release the lock button on the key fob within 10 seconds. NOTE: Your key fob can be unlinked from your memory settings by pushing the set (S) button, and within 10 seconds, pushing the unlock button on the key fob. M EMORY P OSITION R ECALL The set (S) button, which is used to activate the memory save function.
The (1) and (2) buttons which are used to recall either of two saved memory profiles. NOTE: Memory profiles can be set without the vehicle in PARK. L INKING A ND U NLINKING T HE R EMOTE K EYLESS E NTRY K EY F OB T O M EMORY NOTE: The vehicle speed must be lower than 5mph (8km/h) to recall memory positions. If a recall is attempted when the vehicle speed is greater than 5mph (8km/h), a message will be displayed in the instrument cluster display. To recall the memory settings for driver one or two, push the desired memory button number (1 or 2) or the unlock button on the key fob linked to the desired memory position.
Your key fob can be programmed to recall one of two saved memory profiles. NOTE: Before programming your key fob you must select the “Personal Settings Linked to Key Fob” feature through the Uconnect Settings Ъ page189. To program your key fob, perform the following: Driver Memory Settings Buttons A recall can be canceled by pushing any of the memory buttons during a recall (S, 1, or 2). When a recall is canceled, the driver's seat and the adjustable pedals (if equipped) stop moving. A delay of one second will occur before another recall can be selected. P ROGRAMMING T HE M EMORY F EATURE 1. Place the vehicle’s ignition in the OFF position.
To create a new memory profile, perform the following: 2. Select a desired memory profile 1 or 2.