FCA 2022 Chassis Cab — Perform Service Indicator — Diesel Engine

328 SERVICING AND MAINTENANCE NOTE: If models configured with optional B20 capability are operated with greater than 5% levels of biodiesel, the oil change interval must not exceed 12,500­miles (20,000­km) or 400 hours, whichever comes first under any circumstances. See the Fuel Requirements section for more information regarding operation with biodiesel blend (B6-B20) fuel meeting ASTM specification D-7467. P ERFORM S ERVICE I NDICATOR D IESEL E NGINE Under no circumstances should oil change inter­ vals exceed 15,000­miles (24,000­km) or 12­months or 500 hours, whichever comes first. It is recommended that every 3,000­miles Your vehicle will require emissions maintenance at a set interval.

To help remind you when this maintenance is due, the instrument cluster will display “Perform Service”. When the “Perform Service” message is displayed on the instrument cluster it is necessary to have the emissions maintenance performed. Emissions maintenance may include replacing the Closed Crankcase Ventilation (CCV) filter element. The procedure for clearing and resetting the “Perform Service” indicator message is located in the appropriate Service Information. (4,800­km), check the engine oil level at least 30­minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will improve the accuracy of the oil level reading.

Add oil only when the level is at or below the ADD or MIN mark. Severe service (high ambient temperature, short trips, heavy loading, trailer towing, off-road, or law enforcement use) may reduce oil change intervals.