TECHNICAL SPECIFICATIONS 399 ENGINE FLUIDS AND LUBRICANTS 6.4L GASOLINE ENGINE 6.7L DIESEL ENGINE 9 Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend using Mopar® Antifreeze/Coolant 10–Year/150,000 Mile (240,000km) Formula OAT (Organic Additive Technology). Engine Oil We recommend using Mopar® API Certified SAE 0W-40 Full Synthetic Engine Oil which meets the requirements of the manufacturer Material Standard MS-A0921. Equivalent full synthetic SAE 0W-40 engine oil can be used but must have the API Donut trademark Úpage337. Engine Oil Filter We recommend using a Mopar® Engine Oil Filter.
If a Mopar® Engine Oil Filter is unavailable only use filters that meet or exceed SAE/USCAR-36 Filter Performance Requirements. Fuel Selection 87 Octane (R+M)/2 Method, 0-15% Ethanol (Do not use E-85). Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000km) Formula OAT (Organic Additive Technology). Engine Oil In ambient temperatures above 0°F (-18°C), we recommend using 10W-30 engine oil such as Mopar®, Shell Rotella and Shell Rimula that meets the manufacturer Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins® CES 20081may also be used.
The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), we recommend using 5W-40 synthetic engine oil such as Mopar®, Shell Rotella and Shell Rimula that meets the manufacturer Material Standard MS-10902 and the API CK-4 engine oil category is required.