40 GETTING TO KNOW YOUR VEHICLE “Slide-On-Rod” Features Of Sun Visor — If Equipped NOTE: The sun visor can also be extended while the sun visor is against the windshield for additional sun blockage through the front of the vehicle. O UTSIDE M IRRORS P OWER M IRRORS — I F E QUIPPED The sun visor “Slide-On-Rod” feature allows for additional flexibility in positioning the sun visor to block out the sun. The controls for the power mirrors are located on the driver's door trim panel. 1. Fold down the sun visor. To receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. 2.
Unclip the visor from the corner clip. 3. Pivot the sun visor toward the side window. 4. Extend the sun visor for additional sun blockage. NOTE: If your vehicle is equipped with puddle lamps under the outside mirrors, they can be turned off through the Uconnect system Ъ page189. Power Mirror Controls Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror.
Some vehicles will not have a convex passenger side mirror. WARNING! 1 — Left Mirror Selection 2 — Mirror Direction Control 3 — Right Mirror Selection The power mirror controls consist of mirror select buttons and a four-way mirror control switch. “Slide-On-Rod” Extender To adjust a mirror, push either the L (left) or R (right) button to select the mirror that you want to adjust.