Key to diagram: Coordinates A10 Fieldwork computer module (BIF/CAB)............................... 2-i-17 A12 Speed monitor module (DZW)............................................. 2-i-17 A38 RIO rotor module ..............................................................4-m-20 B24 Rotor speed sensor ............................................................ 3-s-17 K49 Road travel main relay ........................................................ 4-i-20 K52 Power supply relay .............................................................. 4-i-20 M28 Rotor flap adjustment motor...............................................
3-n-18 R40 Rotor flaps potentiometer................................................... 3-n-18 S97 Rotor concave cover switch ............................................... 3-h-17 X Rotor flaps connector .........................................................4-q-20 Y98 Rotor variable-speed drive slow solenoid coil................... 4-m-20 Y99 Rotor variable-speed drive fast solenoid coil .................... 4-m-20 B24 Digital sensor (0-I) 12 V 0.4 V – 4.6 V Power supply (Pin 1-3) Signal (Pin 1-2) 0.4 V = LED dark = 0 4.6 V = LED bright = I Y98 Y99 Solenoid coil 3.8 A 3.2 Ω See inscription M28 5.6 A Max. current Measured value table:
Item Component Measured value Remark R40 Potentiometer 0.2 – 5.0 K Ω 0.15 – 4.85 V Coil Signal Electric System LEXION 500 TIC 09a-2 Lex-e-09a 03/05 09a Rotor flap adjustment / Rotor variable-speed drive Item Component Measured value Remark B24 Digital sensor (0-I) 12 V 0.4 V – 4.6 V Power supply (Pin 1-3) Signal (Pin 1-2) 0.4 V = LED dark = 0 4.6 V = LED bright = I R40 Potentiometer 0.2 – 5.0 KΩ 0.15 – 4.85 V Coil Signal M28 5.6 A Max. current Y98 Y99 Solenoid coil 3.8 A 3.2 Ω See inscription