TIC LEXION 500 Electric System Description of function: Uni-spreader circuit When the uni-spreader is in working position, the straw chopper / uni- spreader working position switch (Z58) is closed. In the straw chopper position, the limit switch (Z59) is closed by swinging the straw guide plate. The uni-spreader module (A28) thus receives the signal for actuating the solenoid coils (Y83/Y84). In addition, the uni- spreader master valve (Y78) is also actuated in a modulated way in order to compensate pressure peaks during load changes.
Spreading width and spreading direction are controlled as a function of the comparison between the set value potentiometers (R27/R29) and the actual value sensor (B71). The set values and actual values are compared via the CAN bus. 03/05 Lex-e-13a 13a-3