Key to diagram:
Coordinates A8 AUTOCONTOUR module (CAC).........................................2-i-20 DO Master valve diode PCB ......................................................4-i-20 DS Diagnosis plug (63-pin) VIA.................................................3-i-20 K5 Front attachment raise relay................................................4-i-20 K6 Front attachment lower relay ...............................................4-i-20 K7 Left-hand cutterbar transverse control relay........................4-i-20 K8 Right-hand cutterbar transverse control relay .....................4-i-20 K49 Road travel main relay.........................................................4-i-20 S38a Front attachment raise multifunction pushbutton switch ....4-g-17 S38b Front attachment lower multifunction pushbutton switch....4-g-17 S45 VARIO cutting table adjustment switch ..............................4-g-17 S46 Cutterbar cross levelling switch (manual)...........................4-g-17 S69 Cross levelling / table adjustment function pre-selection switch...................3-h-17 X8 Ground speed control lever connector ...............................4-h-17 XEa Feeder housing connector..................................................5-g-19 Y67 Solenoid coil AUTOCONTOUR cross levelling, left..................................7-f-17 Y68 Solenoid coil AUTOCONTOUR cross levelling, right................................7-f-17 Y85 Raise front attachment solenoid coil...................................5-n-20 Y87 Lower front attachment solenoid coil..................................5-n-20 Note:
On MONTANA machines, the swing angle and the cutting angle can be varied by adjusting the front attachment frame, in addition to the CAC function – see circuit diagram 41s and 41t. 95±10 Ω (Pin 86/1 – 85/2 (Pin 87a/4 – 30/3) (Pin 87/5 – 30/3) Solenoid coil 3.8 A 3.2 Ω See lettering Measured value table:
Item Component Measured value Remark Remote control relay 15 A 30 A Y67 Y68 Y85 Y87 K5 K6 K7 K8 Electric System LEXION Montana 570-520 TIC 20s-2 Lex-e-20s 20s Raise/lower front attachment, cross levelling - Montana 570-520 Item Component Measured value Remark K5 K6 K7 K8 Remote control relay 15 A 30 A 95±10 Ω (Pin 86/1 – 85/2 (Pin 87a/4 – 30/3) (Pin 87/5 – 30/3) Y67 Y68 Y85 Y87 Solenoid coil 3.8 A 3.2 Ω See lettering