CLAAS LEXION 500 series (520, 570) — 21d - Folding the maize picker, snapping plate adjustment, down maize augers

TIC LEXION 500 Electric System Description of function: Folding the maize picker / Snapping plate adjustment When the road travel circuit is unlocked, relays K3, K4 and the fold maize picker switch (S34) are supplied with power by relay K49. The pushbuttons (37c/37d) actuate one of the two solenoid coils (Y46/Y47) via the corresponding relay K3 or K4 for snapping plate adjustment whereas switch (S34) directly controls the solenoid coils (Y42/Y43) in order to fold the picker. The master valve (Y77) is actuated via the diode PCB (DO) in parallel with one of the solenoid coils (Y42/Y43/Y46/Y47) because this function requires that pressure is built up in the system.

The reel controller module (HAS) (A16) converts the analogue signal from sensor (B55) into a digital signal which is displayed on terminal (A30) via the CAN bus. Sensor (B55) receives the necessary 12 V reference voltage from the actuated road travel main relay K49/87. Down maize auger drive The down maize augers are driven hydraulically by the reel drive variable displacement pump. The reel controller module (A16) controls the speed – circuit diagram 22a The speed adjustment is by means of the +/- keys on the terminal (A30). Since there is no speed sensor for speed monitoring/control, the automatic reel speed control in the terminal (A30) must be switched off. 03/05 Lex-e-21d 21d-3