CLAAS LEXION 500 series (520, 570) — 25a - Speed monitor

TIC LEXION 500 Electric System Description of function: * Important: There are different input speeds of the rotor gearboxes, depending on the version. This must also be considered in the machine configuration using the CLAAS diagnosis system. - CLAAS transmission ratio: 1:2.14 - Rцchling transmission ratio: 1:2.59 Speed monitor The frequencies of the individual sensors are converted into a digital signal by the fieldwork computer (A10) or speed monitor (A12) modules and then displayed through the CAN bus on the terminal (A30). If admissible slippage limits are exceeded, a corresponding alarm message is also displayed.

03/05 Lex-e-25a 25a-3 Diesel engine 2,100 - 2,200 rpm Main shaft 1,400 rpm Feeder housing without variable-speed drive with variable-speed drive 425 rpm 285 - 425 rpm Threshing drum without reduction gearbox with reduction gearbox 395 - 1,150 rpm 160 - 480 rpm Returns elevator 400 rpm Grain elevator 350 rpm Fan Lexion 580-520 Lexion 510 700 - 1,600 rpm 480 - 1,070 rpm Intensive separation system, front (Lexion 560-510) 140 rpm Intensive separation system, rear (Lexion 560-510) 140 rpm Finger roller 120 rpm Straw walker (Lexion 560-510) 240 rpm Rotors (Lexion 580/570) Variator Step drive 1st step standard 2nd step standard 3rd step standard 4th step for maize 360 - 1,050 rpm* 960 rpm 800 rpm 640 rpm 500 rpm Straw chopper (Lexion 560-510) Grain Maize 3,310 rpm 1,950 rpm Chaff spreader 550 - 850 rpm Straw spreader without reduction gearbox with reduction gearbox 420 - 1,230 rpm 180 - 560 rpm Uni-spreader (Lexion 580) Grain Maize 1,750 rpm 900 rpm