TIC LEXION 500 Electric System Description of function: Hydrostatic brake valve system When the diesel engine speed exceeds the allowed maximum of 2230 rpm (e.g. downhill travel), the ground drive hydraulic motor (HBM) brake restrictor module A45 also receives this information from the fieldwork computer module (BIF/CAB) A10 via the CAN bus. Now the ground drive hydraulic motor (HBM) brake restrictor module A45 actuates the master valve (Y77) in order to put a greater load on the drive (see also diagram 4). When the diesel engine speed exceeds 2300 rpm, the brake restrictor (Y124) is additionally actuated in order to restrict the high-pressure circuit in the ground drive.
When the speed now drops below 2210 rpm, the brake restrictor (Y124) is deactivated. Note: The function of the ground drive hydraulic motor (HBM) brake restrictor module A45 may be checked using terminal A30. In the menu "Settings – Max. no-load speed – Speeds learn – OK", the outputs to the master valve (Y77) and to the module A45 are automatically switched for 5 seconds. 03/05 Lex-e-42a 42a-3