CLAAS LEXION 500 series (520, 570) — Module A66 - GPS pilot module (GPB)

TIC LEXION Montana 570-520 Electric System Description of function: Activation of road travel During road travel, the road travel switch (S52) must be locked in order to cut the power supply for all unnecessary electrical and hydraulic functions. Working hydraulics master valve In order to be able to build up the necessary working pressure for many hydraulic controls, the neutral hydraulic circulation must be blocked (see also the "Hydraulic system" section). The actuation of the working hydraulics master valve (Y77) on Montana machines is always via the gearshift control module (A36/pin 16), the diode PCB D0 and the ground drive hydraulic motor brake restrictor module (A45/pin5 pin2).

A LED (D5) provided on the diode PCB indicates the activation of the circuit. Montana axle hydraulics master valve For the Montana functions as well, the circulation of the independent axle control system hydraulics must be blocked (see also "Hydraulic System" document). According to the actuated functions, the Montana control unit (A35) actuates the Montana master valve (Y128) and/or the working hydraulics master valve (Y77) via the gearshift control module (A36).

Montana brake pressure accumulator The sensor/switch (B90) controls the brake system accumulator pressure and, if necessary, actuates the working hydraulics master valve (Y77) via the gearshift control module (A36/pin16), the diode PCB D0 and the Ground drive hydraulic motor brake restrictor module (A45/pin5 pin2) in order to recharge the brake circuit accumulator – circuit diagram 42s. Hydrostatic brake valve system When the diesel engine speed exceeds the allowed maximum of 2230 rpm (e.g. downhill travel), the ground drive hydraulic motor (HBM) brake restrictor module A45 also receives this information from the fieldwork computer module (BIF/CAB) A10 via the CAN bus.

Now the ground drive hydraulic motor (HBM) brake restrictor module A45 actuates the master valve (Y77) in order to put a greater load on the drive – circuit diagram 42 of standard machine. 03/05 Lex-e-04s 4s-3