OM4048 1/08 Lubrication & Service - Section 40 Page 40-5 10 HOUR (DAILY) INSPECTION (Continued) 7. 8. 9. FIGURE 40-2. FIGURE 40-3. FIGURE 40-4. 1. Filter Cover 2. Cab Filter Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS COOLING AIR DUCTWORK - Inspect ductwork from the blower to the rear drive case. Ensure that duct- work is secure, free of damage, and unrestricted. AIR INTAKE PIPING - Check all mounting hardware, joints, and connections. Ensure no air leaks exist and all hardware is properly tightened. Figure 40-2.
AIR CLEANERS - Check the air cleaner vacuum gauges in the operator cab, Figure 40-3. The air cleaner(s) must be serviced if the gauge(s) shows the following maximum restriction: Komatsu SDA16V160 or SSDA16V160 Engines: . . . . . . . . . . . . . . . . . . . . . . . . 25 in. of H O vacuum. 2 Refer to Section C in the shop manual for servicing instructions for the air cleaner elements. Empty the air cleaner dust caps. NOTE: After service, push the reset button on face of gauge to allow the gauge to return to zero. CAB AIR FILTER - Under normal operating condi- tions, clean every 250 hours. In extremely dusty con- ditions, service as frequently as required.
Clean the filter element with mild soap and water. Rinse com- pletely clean and air dry with a maximum of 275 kPa (40 psi). Reinstall the filter. Refer to Figure 40-4.