Komatsu — 50 HOUR LUBRICATION AND MAINTENANCE CHECKS

OM4048 1/08 Lubrication & Service - Section 40 Page 40-7 50 HOUR LUBRICATION AND MAINTENANCE CHECKS *1. *2. *3 *These checks are required only after the initial 50 hours of operation (such as: the commissioning of a new truck, or after a new or rebuilt component installation). FIGURE 40-5. Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS FUEL FILTERS - Change the fuel filters, (fuel separators). Refer to engine manufacturer's maintenance manual for fuel filter replacement instructions.

HYDRAULIC SYSTEM FILTERS - Replace filter ele- ments only, after the initial 50, 100, and 250 hours of operation; then at each 500 hours of operation there- after. FAN DRIVE ASSEMBLY - Check torque for the six fan mounting cap screws: 237 N·m (175 ft lbs). See Figure 40-5.