Komatsu — MAJOR COMPONENT DESCRIPTION

OM5050 Specifications - Section 50 Component Description Page 50-1 MAJOR COMPONENT DESCRIPTION Truck And Engine Operator's Cab The 830E-AC Dump Truck is an off-highway, rear dump truck with AC Electric Drive. The gross vehicle weight is 385 852 kg (850,650 lbs.). The engine is a Komatsu SDA16V160 rated @ 1865 kW (2500 HP). The operator cab has been engineered for operator comfort and to allow for efficient and safe operation of the truck. The cab provides wide visibility, with an inte- gral 4-post ROPS/FOPS structure, and an advanced analog operator environment.

It includes a tinted safety-glass windshield and power-operated side win- dows, a deluxe interior with a fully adjustable seat with lumbar support, a fully adjustable tilt/telescope steering wheel, controls mounted within easy reach of the oper- ator, and an analog instrument panel which provides the operator with all instruments and gauges which are necessary to control and/or monitor the truck's operat- ing systems. Alternator (GTA-41) The diesel engine drives an in-line alternator at engine speed. The alternator produces AC current which is rectified to DC within the main control cabinet.

The rec- tified DC power is converted back to AC by groups of devices called "inverters", also within the main control cabinet. Each inverter consists of six "phase modules" under the control of a "gate drive unit" (GDU). The GDU controls the operation of each phase module. Power Steering Cooling air for the control / power group and wheel motors, as well as the alternator itself, is provided by dual fans mounted on the alternator shaft. The truck is equipped with a full time power steering system which provides positive steering control with minimum operator effort.

The system includes nitro- gen-charged accumulators which automatically provide emergency power if the steering hydraulic pressure is reduced below an established minimum. AC Induction Traction Motorized Wheels The alternator output supplies electrical energy to the two wheel motors attached to the rear axle housing. The motorized wheels use three-phase AC induction motors with full-wave AC power. Dynamic Retarding The dynamic retarding is used to slow the truck during normal operation or control speed coming down a grade.

The dynamic retarding ability of the electric sys- tem is controlled by the operator through the activation of the retarder pedal in the operators cab and by set- ting the RSC (Retarder Speed Control). Dynamic Retarding is automatically activated, if the truck speed goes to a preset overspeed setting. The two wheel motors convert electrical energy back to mechanical energy through built-in gear trains within the wheel motor assembly. The direction of the wheel motors is controlled by a forward or reverse hand selector switch located on the center console.

Suspension Brake System HYDRAIR®II suspension cylinders located at each wheel provide a smooth and comfortable ride for the operator and dampens shock loads to the chassis dur- ing loading and operation. The braking system consists of an all hydraulic actua- tion system. Depressing the brake pedal actuates wheel-speed single disc front brakes and armature- speed dual disc rear brakes. The brakes can also be activated by operating a switch on the instrument panel. The brakes will be applied automatically if sys- tem pressure decreases below a preset minimum. The parking brake is intregal with the service brake cal- iper, and is spring-applied and hydraulically-released.

The park brake is applied by moving the directional control lever to the PARK position.