OM5050 Specifications - Section 50 Component Description Page 50-3 SPECIFICATIONS These specifications are for the standard Komatsu 830E-AC Truck. Customer Options may change this listing. SERVICE CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . Liters . . . (Gallons) Crankcase * . . . . . . . . . . . . . . . . . . . 280 . . . . . . . . .74 * Includes Lube Oil Filters Cooling System . . . . . . . . . . . . . . . . 568 . . . . . . (150) Fuel . . . . . . . . . . . . . . . . . . . . . . . . 4542 . . . . . (1200) Hydraulic System. . . . . . . . . . . . . . . 946 . . . . . . (250) ENGINE Komatsu SDA16V160 No. of Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.16 Operating Cycle. . . . . . . . . . . . . . . . . . . . . . . . 4-Stroke Rated Brake HP. . . .1865 kW (2500 HP) @ 1900 RPM Flywheel HP . . . . . .1761 kW (2360 HP) @ 1900 RPM Weight* (Wet) . . . . . . . . . 9,608 kg (21,182 pounds) * Weight does not include Radiator, Sub-frame, or Alternator Wheel Motor Gear Box (each). . . . . . 38 . . . . . . . (10) HYDRAULIC SYSTEMS Hoist . . . . . . . . . . . . . . . . . . . . . . Tandem Gear Pump 851 lpm (225 gpm) @ 1900 rpm and 17 240 kPa (2,500 psi) Steering/Brake Pump: . Pressure Compensated Piston Rated @ . . . . . . . . . . . 246 lpm (65 gpm) @ 1900 rpm and 18 961 kPa (2750 psi) Relief Pressure-Hoist. . . . . . . . .
17 240 kPa (2500 psi) Relief Pressure-Steering/Brake . 27 580 kPa (4000 psi) Hoist Cylinders (2) . . . . . . . . . . . . . . 3-Stage Hydraulic Tank (Vertical/Cylindrical) . . . . . . . . . Non-Pressurized Filtration. . . . . . . . . . . . . . In-line replaceable elements Suction. . . . . . . . . . . . . .Single, Full Flow, 100 Mesh Hoist & Steering Filters..............Beta 12 Rating =200 Dual In-Line, High Pressure AC ELECTRIC DRIVE SYSTEM (AC/DC Current) Alternator . . . . . . . . . . . . . . General Electric GTA - 41 Dual Impeller, In-Line Blower .255 mі/ min (9,000 cfm) Motorized Wheels . . . . . GEB25 AC Induction Traction Motors Standard Gear Ratio* . . . . . . . . . . . . . . . .
31.875:1 Maximum Speed . . . . . . . . . . . . 64.5 km/h (40 mph) *NOTE: Wheel motor application depends upon GVW, haul road grade and length, rolling resistance, and other parameters. Komatsu & G.E. must analyze each job condition to assure proper application. DYNAMIC RETARDING SERVICE BRAKES Electric Dynamic Retarding . . . . . . . . . . . . . . Standard Maximum Rating . . . . . . . . . . . . . . 2983 kW (4000 HP) Actuation . . . . . . . . . . . . . . . . . . . . . . . . . .All Hydraulic Front . . . . . . . . . . . . . . . . . . Wheel Speed, Single Disc Inboard Mounted . . . . . . . . . . . . . . . . . . . 3 Calipers Disc Diameter, O.D.. . . . . . . . . 1213 mm (47.75 in.) Rear . . . . . .
. . . . . . . . . . . Armature Speed, Dual Disc Disc Diameter, O.D.. . . . . . . . . . .635 mm (25.00 in.) Emergency Brake- . Automatically Applied (Standard) Wheel Brake Lock . . . . . . . . Manual Switch on Panel . . . . . . . . . . . . . . . . . . . . . . . . . (Loading and Dumping) BATTERY ELECTRIC SYSTEM Batteries . 4 x 8D 1450 CCA, 12 volt, in series/parallel, bumper mounted with disconnect switch Alternator . . . . . . . . . . . . 24 Volt, 140 Ampere Output Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Volt Cranking Motors (2). . . . . . . . . . . . . . . . . . . . . . 24 Volt PARKING BRAKE Each Rear Wheel . . . . . . . . . . . . . . . . Intregal Caliper .
. . . . . . . . . . . .Spring Applied, Hydraulically Released STEERING Turning Circle (SAE) . . . . . . . . . . . . . . . 28.4 m (93 ft.) Twin hydraulic cylinders with accumulator assist to pro- vide constant rate steering. Emergency power steering automatically provided by accumulators.